LED plate that replaces the inserts in rubber arms, resulting in several nice functions, available in both two-color and one-color versions.
For a rubber arm, you need 2 plates, so in the same rubber arm you can have 2 different colors and if you choose two colors, you can have e.g. white position light and orange indicators/position light in the same LED plate with the help of a control box.
The plates thus replace the original lamp in the rubber arm. Rubber arm not included. Double color tiles should be used with clear glass or white glass.
Connection & Assembly:
Connection is made with the help of the 1 meter long cable that is connected to the plate.
On the back of the plates there are guide pins so that you can easily put 2 plates together.
Plates with one color have two cables, red cable for 24V plus and black cable for 24V minus.
Tiles with two colors, e.g. white and red color have two wires. White cable on plus and red cable on minus then gives white color and Red cable on plus and white cable on minus then gives red color, this is changed most easily with the help of a controller.
Change from color to two-color:
To change the color of the double color LED plates, you need to change the plus and minus. This can be done with a switch, two-pole relay or our control boxes where you can also control so you get e.g. orange turn signal light when activated out of the turn signals, when the turn signals are deactivated the color returns to the color it had. We have 3 different control boxes with 3 different functions:
Manual change of color on LED plate with 2 colors:
Dual Color Polarity Flip Controller
This control box is used to change the polarity in order to manually change the color of the LED plate, which has two colors, with a switch. Do you have e.g. LED plate "Orange & Cold White (Double Color)" and want to be able to change the color between orange and cold white, you need to change the position of plus and minus, then you use this control box together with a switch.
Automatic change of color upon activation of turn signals, alternatively flash light instead of turn signals on LED plate with 2 colors:
Dual Color Blinker & US Light Controller
This control box is used to automatically change the color of an LED plate with two colors when activating turn signals, e.g. if you have the LED plate "Orange & Cold White (Dual Color)" and want cold white as position light but when you activate the blinkers, change the color to orange, you use this box. Alternatively, instead of blinkers, you can use the secondary color as flash light with the help of a control box for flash light/warning light together with this control box.
Get the LED plate with 1st color to flash when the blinkers are activated:
Blinker & US Light Controller
You use this control box if you want to get a turn signal function in a fixed position light, this can actually be used on any lamp and not just these LED plates. So used on lamp with a color used for position light, with this controller the lamp will flash at the same rate as the turn signal when you activate your turn signal, then return to position light again.
If you need help to assemble or which box to choose, it is of course fine to contact us for support!
