Halo Strobe Light & Position Light White

Strobe/warning light lamp with a halo side/position light around the edge of the lamp and a bright LED strobe warning light in the center. The lamp is available with side/position lights in red, white, and orange colors, and a strobe light in the middle.

The strobe and side/position lights can be controlled individually and can also be turned on simultaneously. This is a sleek lamp and a more affordable alternative to other solutions if you need both marker and warning lights. It eliminates the need for an extra unit that also needs to be mounted and connected.

The warning light has 21 different patterns, and the lamps can be set up in alternating groups, so that they flash right/left or up/down on your vehicle.

The warning light and marker light are ECE-approved (R65 warning light, R7/R91 position light, R10 EMC, and CE), allowing them to be used on public roads and highways.

Connection:

• Gray = Plus marker light (12V-24V)
• Red = Plus warning light (12V-24V)
• Black = Minus/Ground
• Yellow = Flash pattern
• White = Night return for strobe light by connecting to black/minus

Flash pattern: When you pulse the yellow wire to plus, the lamp changes to the next flash pattern. Three quick pulses set the lamp to flash pattern 1.

Grouping: When you connect both red and yellow to plus at the same time, the grouping setup is initiated. The lamp will flash once or twice to show the set group. You can change the group by pulsing the yellow wire to plus. As soon as you turn off the lamp, it will remember the set group.

• Average consumption: 9W
• Lifetime: 100,000 hours
• Max power: 18W
• Voltage: 12-24V DC
• Cable: 30 cm
• Operating temperature: -30°C to +60°C
• IP rating: IP67